August 6

Grout Cleaning Ipswich Tips: Vinegar, Baking Soda and Ammonia Mixture for Cleaning Grouts

For the most part, tiled floors are easy to clean, as tiles’ surface is smooth, and dirt and grime don’t usually stick and can be easily removed. The space between the tiles however, is a totally different story; it’s a dirt trap, the combination of cement, water and sand makes it very difficult to clean, and it picks up dirt and stains and becomes a home for various bacteria that may be harmful for health. This is why we have professional cleaning experts that offer specialized grout cleaning service. If you live in or near Queensland, then you’re lucky, as there are tens of grout cleaning Ipswich experts and upholstery cleaning Brisbane companies out there that you can choose to do the job for you.

grout cleaning ipswich
grout cleaning ipswich

But if you think your grout is not the worst and you can do the cleaning on your own, you’re in the right page, as this entry will give you some tips and tricks for cleaning tile grouts on your own using products you usually see in your kitchen and bathroom.

Before You Start the Thorough Cleaning Process

Before you start the actual cleaning, you need to do an initial cleaning or preliminary cleaning to remove surface dirt and stains. Mop your tile floors or wipe down kitchen counters regularly to take off top layer scum. This will also make the cleaning process a lot easier. Here’s one great grout cleaning Ipswich tip for you.

Vinegar and Ammonia Mixture

First Step

You can make your own cleaning solution by mixing vinegar and ammonia. In a large bowl or bucket, mix 1/2 cup of baking soda, 1/4 cup of white vinegar, and 1/3 cup of ammonia in a 7 cups of warm water. Mix thoroughly to dissolve the baking soda.

Second Step

Then, pour the mixture in a spray bottle to mist the tight dirty areas. Shake the solution well.

Third Step

Using your spray bottle with vinegar-ammonia solution, spray grout tiles so it’s damped. It would be best if you start in a small area, 1-2 square feet for example. Let the mixture settle for a couple of minutes up to five (5) minutes.

Fourth Step

Then, start scrubbing the grout using a brush of your choice. You can use a used toothbrush, hard bristled cleaning brush, a magic eraser, etc., to scrub the area. Brush the lines thoroughly to remove deep stains and expose the natural white of the lines.

Fifth Step

The scrubbing may have created small pools of dirty liquid on the surface. Get a damp cloth to wipe these liquid off and squeeze it on a separate container (say a separate bucket).

Sixth Step

If you think you’re done, and you have exposed the natural white lines between your tiles, mop the floor and towel dry. For counter tops, wipe the entire surface with a generic cleaning spray.

The best way to clean grout lines is to keep it clean as much as possible, before they turn from white to dirty white or black, so it won’t trap hard-to-remove stains and you don’t have to do a thorough cleaning as often. However, if you’re like many busy working individuals who don’t have the luxury of time and energy to do the cleaning, then you can always ask the professionals in your area to do the job for you, such as Brisbane tile cleaning experts. Save yourself from the hassles and invest in health and cleanliness with Ready Cleaning Services; this grout cleaning Ipswich offers services for both commercial and domestic cleaning services. Visit http://www.readycleaning.com.au



Copyright 2017. All rights reserved.

Posted August 6, 2015 by Heather Patch in category "Home & Gardens

Leave a Reply

Your email address will not be published. Required fields are marked *